3D render of the Solenery booth: yellow backdrop with the Solenery logo, two clear acrylic tanks of yellow balls, a white logo counter, logo cubes and a screen on a stand
The finished Solenery booth at ETC Canada: a yellow backdrop with the Solenery logo, a tall acrylic tank of yellow balls, a white logo counter and a screen on a stand
Close-up of a clear acrylic tank filled with yellow balls, the yellow backdrop and Solenery logo behind it
The booth during install: two acrylic tanks of yellow balls either side of the yellow backdrop, a laser level line across the wall, the ball-topped counter in front

1 / 4

EXHIBITION DESIGN

Solenery

Solenery Booth

A 10 by 10 ft booth for a Toronto clean energy startup at ETC Canada, its sphere logo built as two acrylic tanks of sun yellow balls.

Watch the Build Process

See how this project came to life on Instagram

Watch Reel

THE BRIEF

A Startup in a Hall Full of Big Stands

Solenery is a Toronto clean energy platform that helps Canadian property owners find incentives, plan upgrades and compare installer quotes. For Electricity Transformation Canada 2026, held October 19 to 21 at the Enercare Centre in Toronto, they took a 10 by 10 ft booth and asked us for an idea that would stand out on a floor of much larger exhibitors.

Their logo is a row of spheres. We took it literally: the booth would hold the sphere in physical form, as yellow balls stacked behind clear acrylic and framed by a solid yellow backdrop.

THE CHALLENGE

A Small Footprint and an Exact Yellow

Ten feet by ten feet: once a counter, a screen and seating are in, there is little floor left. The big gesture had to live at the edges of the booth and still be readable from the aisle.

The right yellow: Solenery is careful with its brand colour, a warm sun yellow. Ready-made play balls come in a short list of yellows and few sit close to a brand colour. We had to source balls that matched, then match the backdrop to the balls.

Clear has to stay clear: the tanks only work if the balls read sharply through the acrylic. Scratches, haze or a badly placed seam would make the main feature look tired from across the hall.

OUR APPROACH

Two Columns and a Yellow Wall

Two tall acrylic tanks stand at the front corners of the booth, each on a yellow plinth under a yellow cap, so from the aisle they read as columns of the logo. Each tank is 5 ft wide, 8 ft high and 10 in deep: shallow enough to keep floor free, big enough to hold the colour at a distance.

The tank faces are 1/4 in clear acrylic, so the balls read sharply from the aisle. More than 2,000 yellow balls fill the two tanks, picked against Solenery's yellow before anything was built.

The backdrop is plywood panels on an MDF support structure, painted to match the balls. In front of it sit a white counter with the logo, a white logo cube, grey carpet and a portrait screen on a stand for demos.

The finished Solenery booth: yellow backdrop with the Solenery logo, an acrylic tank of yellow balls, a demo screen on a stand and the white logo counter
The finished booth: tank, backdrop, demo screen and logo counter inside 10 by 10 ft.

FROM SKETCH TO SHOW FLOOR

Drawn, Modelled, Then Built

The booth went from a hand sketch to line drawings to a 3D model, which let Solenery see the yellow, the tank proportions and the counter position before anything was cut. The shop drawings came from the same model.

We built the tanks, plinths and backdrop in-house, then installed on the show floor at the Enercare Centre: panels trimmed to fit on site, tanks set plumb against a laser line, then filled. After the show we took it all down and cleared the space.

A Brience crew member in a 'Let the maker make' cap and jacket trimming a yellow backdrop panel on the show floor
Trimming a backdrop panel to fit on the show floor.
A Brience crew member in a 'Let the maker make' jacket fitting a clear acrylic panel to a yellow tank frame on the show floor
Fitting an acrylic tank to its yellow frame on the show floor.

THE RESULT

The Logo at Full Size

On the floor the booth read as Solenery from the aisle before anyone saw the name: a yellow wall, two columns of yellow spheres and the logo on the backdrop and the counter.

Inside a 10 by 10 footprint there was still room for the counter, the demo screen and a place to sit, because the feature pieces sat at the corners instead of taking floor.

Their logo is a row of spheres, so we built the spheres.
Close-up of a clear acrylic tank filled with yellow balls, the yellow backdrop beside it
One of the two tanks, with the matched yellow backdrop behind.

TECHNICAL SPECIFICATIONS

What We Built

Booth
10 ft × 10 ft, ETC Canada 2026, Enercare Centre, Toronto
Pieces
Yellow backdrop, two acrylic ball tanks on plinths, logo counter, logo cube
Ball Tanks
Two, 5 ft wide × 8 ft high × 10 in deep, 1/4 in clear acrylic, yellow plinth and cap
Fill
More than 2,000 yellow play balls, matched to Solenery's sun yellow
Backdrop
Plywood panels on an MDF support structure, painted yellow
Floor
Grey carpet
Process
Hand sketch, line drawings, 3D model, shop drawings
Fabrication
100% in-house by Brience
Install
On site at the Enercare Centre, October 2026, dismantled after the show

GALLERY

Project Photos

The finished Solenery booth at ETC Canada: a yellow backdrop with the Solenery logo, a tall acrylic tank of yellow balls, a white logo counter and a screen on a stand
The booth during install: two acrylic tanks of yellow balls either side of the yellow backdrop, a laser level line across the wall, the ball-topped counter in front
A Brience crew member in a 'Let the maker make' cap trimming a yellow panel with a circular saw on the show floor

WHAT WE DELIVERED

End-to-End, Under One Roof

  1. 01Design

    Sketched the concept, drew and modelled the booth in 3D, then produced shop drawings for the tanks and backdrop.

  2. 02Sourcing

    Found yellow balls that matched Solenery's sun yellow, then painted the backdrop to match them.

  3. 03Fabrication

    Built the acrylic tanks, plinths and plywood backdrop in-house, with the counter and logo cube.

    3D render of the Solenery booth: yellow backdrop with the Solenery logo, two clear acrylic tanks of yellow balls, a white logo counter, logo cubes and a screen on a stand
  4. 04Install & Dismantle

    Installed the booth on the show floor for ETC Canada 2026, then took it down after the show.

Your Next Project Deserves This

Whether you're planning a brand activation, a product launch, or something that doesn't have a name yet, we'd love to talk.

Get a Quote
A wall of pinned material samples and project sketches