Pop-Ups

5 min5 min read

What is a shop-in-shop, and what does it take to build one?

A shop-in-shop is a brand's own area inside another retailer's store, with its own fixtures, signage and sometimes its own staff, trading under the host's roof. In the GTA: Jellycat inside Bergo Designs, AutoShack counters inside RONA, and Toys"R"Us inside Staples from November 2026. Building one is mostly fixture work: shelving, counters, signage and storage made to fit the host's floor, power, standards and install hours, so get the host's rules in writing first.

Bottega Veneta's 2025 pop-up shop on the ground floor of Harrods: a framed shopfront with the brand name, walnut shelving and a central wooden table, set into the store's stone hall
Bottega Veneta's one-month shop-in-shop on the ground floor of Harrods, September 2025. Photo: courtesy of Bottega Veneta, via Dezeen.

In brief. A shop-in-shop is a brand's own area inside another retailer's store, with its own fixtures, signage and sometimes its own staff, trading under the host's roof. In the GTA: Jellycat inside Bergo Designs, AutoShack counters inside RONA, and Toys"R"Us inside Staples from November 2026. Building one is mostly fixture work: shelving, counters, signage and storage made to fit the host's floor, power, standards and install hours, so get the host's rules in writing first.

On November 3, Retail Insider reported that Toys"R"Us would return to Canada as shop-in-shops inside Staples, starting at 45 Red Maple Road in Richmond Hill on November 14 and rolling out across close to 300 Staples stores through 2027. The old Toys"R"Us stores averaged about 45,000 square feet, according to court documents cited in the story. Neither company has said how much floor the new areas will take.

A shop-in-shop is a brand's own area inside another retailer's store: its own fixtures, signage and look, sometimes its own staff, trading under the host's roof. The brand gets a home without a lease of its own and borrows the host's traffic. The host gets a new reason for people to visit. It can be permanent or last a month, a corner or half the store. Three GTA examples:

  • Jellycat at Bergo Designs. The soft toy brand opened its first Canadian shop-in-shop on October 3, 2025, inside Bergo Designs in the Distillery District: 400 square feet inside a 10,000-square-foot store, with 170 products (Retail Insider). By mid-November, blogTO reported ticketed entry at peak hours.

  • AutoShack inside RONA. RONA is adding AutoShack parts counters to 12 stores in the Greater Toronto and Ottawa regions by summer 2026, starting at RONA+ Golden Mile, each run by AutoShack staff (RONA).

  • Nintendo inside EB Games. We looked at Nintendo's 1,500-square-foot space at 267 Yonge Street earlier this month.

Brience is a Toronto-based custom fabrication and experiential design studio. A shop-in-shop is mostly fixture work, so here's what we'd want to know before drawing one.

Shop ObjectsExplore our curated brand essentials

Who controls what

The host owns the floor, and most of the rules come from the host. At Selfridges in London, Swedish designer Gustaf Westman's month-long Corner Shop pop-up, open from June 29, 2026, started in his words as "a white box, obviously; it's a very plain space from the start" (Dezeen). He built a living room, a kitchen, a dining area and a bedroom inside it. At Harrods, Bottega Veneta's one-month ground-floor shop in September 2025 was designed by the brand's in-house team (Dezeen). Staffing is a deal point too: AutoShack, not RONA, runs its counters.

Gustaf Westman's 2026 Corner Shop at Selfridges: a white-walled room with a round blue shelving tower of colourful ceramics on a red rug, with arched openings
Gustaf Westman built rooms inside the white box of Selfridges' Corner Shop, June 2026. Photo: Lewis Ronald, via Dezeen.

We couldn't find a Canadian host retailer that publishes its shop-in-shop rules, so ask for these in writing before design starts:

  • Fixture standards. Maximum heights, sightlines across the floor, materials the host won't allow, and how your floor meets theirs.

  • Signage and lighting. What can hang from the ceiling, what can light up, and who approves graphics.

  • Power and data. What's already there, who connects it, and what your screens and lights need.

  • Install hours and access. Delivery times, the dock and freight elevator, after-hours work, and whether the host requires its own trades.

  • Stock and staff. Who sells, who restocks, and where backstock lives.

Get a QuoteRequest your personalized project

Fixtures that fit someone else's store

Bottega Veneta's Harrods shop was built from an interlocking system of concrete and Italian walnut shelving, around a central table, La Tavola, used to show jewellery, fragrance and small leather goods. Westman kept most products off the walls. "I don't like pop-ups when you attach stuff to the wall, because it feels so temporary," he told Dezeen. The AutoShack counters show the practical version: a blue mesh header sign hung over a long counter with screens, steel shelving full of parts behind it, and tall graphic panels at each end.

An AutoShack shop-in-shop inside a RONA store: a blue mesh header sign hung above a long navy counter with screens, steel shelving of boxed auto parts, and tall blue graphic panels
An AutoShack shop-in-shop inside RONA, run by AutoShack staff. Photo: via Retail Insider (RONA and AutoShack announcement image).

Planning the build

  • Pieces that travel. Fixtures sized for the host's doors and freight elevator, and assembled on site within the host's install window.

  • Finishes for a busy floor. Edges and bases that survive carts, floor cleaners and kids.

  • Storage inside the fixture. La Tavola's drawers hold weaving materials and small items. Build drawers and cabinets in, so the shelves stay full without trips to a back room the host may not give you.

  • Room for a queue. Jellycat's 400 square feet needed tickets at busy times. Plan where a line forms without blocking the host's aisles.

Get a QuoteRequest your personalized project

On timing, our own planning figures: most modular builds leave our shop four to six weeks after a signed scope, and larger custom structures take about eight to twelve weeks. Our guide to hiring a fabricator in Toronto covers quotes and venue rules. If you're planning a shop-in-shop in the GTA, send us the host's floor plan and we'll start there.

La Tavola, a long walnut table with drawers and display trays of bags and small leather goods, in front of shelving in Bottega Veneta's Harrods shop
La Tavola, the display table with built-in drawers at the centre of Bottega Veneta's Harrods shop. Photo: courtesy of Bottega Veneta, via Dezeen.

Sources: Retail Insider, "Toys"R"Us Canada to Make Comeback Through Nearly 300 Staples Stores" (November 2026); Retail Insider, "Jellycat opening 1st-ever Canadian shop-in-shop at Toronto's Distillery District" (October 2025); blogTO, "This popular Toronto store is so busy you often need a ticket to get inside" (November 2025); RONA inc., "RONA expands partnership with AutoShack, launching Shop in Shop concept across twelve Ontario stores" (March 2026); Dezeen, "Bottega Veneta unveils Harrods pop-up store informed by modernist architecture" (September 2025); Dezeen, "Gustaf Westman creates colourful room settings for Selfridges pop-up store" (July 2026).

Author: Mo Sani

Have a project in mind?

Tell us about your vision, and we'll handle everything from design to install.

Agency team? Meet your agency fabrication partner. Local build? See custom fabrication in Toronto.

A wall of pinned material samples and project sketches